自动感应平移门
Automatic induction sliding door
（1）主控制器：它是自动门的指挥中心，通过内部编有指令程序的大规模集成块，发出相应指令，指挥马达或电锁类系统工作；同时人们通过主控器调节门扇开启速度、开启幅度等参数。流水槽模具 u型槽模具 电缆槽模具 隔离墩钢模具 护坡砖模具 钢制闸门 螺杆式启闭机 卷扬式启闭机
(1) Main controller: it is the command center of the automatic door. It sends out corresponding instructions through the large-scale integrated block with internal command program to command the motor or electric lock system; At the same time, people adjust the door opening speed, opening amplitude and other parameters through the main controller.
（2）感应探测器：主要分两种：微波感应器和红外感应器。负责采集外部信号，如同人们的眼睛，当有移动的物体进入它的工作范围时，它就给主控制器一个脉冲信号。
(2) Induction detector: mainly divided into two types: microwave sensor and infrared sensor. It is responsible for collecting external signals. Like people's eyes, when a moving object enters its working range, it gives a pulse signal to the main controller.
（3）动力马达：提供开门与关门的主动力，控制门扇加速与减速运行。
(3) Power motor: it provides the main power for opening and closing the door, and controls the acceleration and deceleration of the door leaf.
（4）门扇行进轨道：就象火车的铁轨，约束门扇的吊具走轮系统，使其按特定方向行进。
(4) Door leaf travel track: like the railway track of a train, the spreader wheel system that restricts the door leaf to travel in a specific direction.
（5）门扇吊具走轮系统:用于吊挂活动门扇，同时在动力牵引下带动门扇运行。
(5) Door leaf spreader wheel system: used to hang the movable door leaf and drive the door leaf to run under power traction.
（6）同步皮带（有的厂家使用三角皮带）：用于传输马达所产动力，牵引门扇吊具走轮系统。
(6) Synchronous belt (triangular belt is used by some manufacturers): it is used to transmit the power produced by the motor and pull the door leaf spreader pulley system.
（7）下部导向系统：是门扇下部的导向与定位装置，防止门扇在运行时出现前后门体摆动。
(7) Lower guiding system: it is the guiding and positioning device at the lower part of the door leaf to prevent the front and rear door bodies from swinging during the operation of the door leaf.
（8）自动感应门内装有感应门机，就是控制自动门进行打开关闭的一系列组件的合称；也叫自动门机组或感应门机组；感应门机的组件一般包括：马达，控制器，吊轮，皮带，导轨。
(8) An induction door machine is installed in the automatic induction door, which is the collective name of a series of components that control the opening and closing of the automatic door; Also called automatic door unit or induction door unit; The components of induction gantry crane generally include: motor, controller, lifting pulley, belt and guide rail.